● 24/7 Real-Time Monitoring

Oil Spill Detection and Monitoring System

A complete turnkey solution built around the DSOD703 non-contact UV fluorescence sensor. Detect hydrocarbon sheens as thin as 1 micron, trigger instant alarms, and integrate seamlessly with your SCADA infrastructure — before a single drop becomes a disaster.

<1

Micron Detection Sensitivity

<5

Second Response Time

10

Meter Detection Range

20+

Countries Deployed

Why It Matters

Every Second Counts When Oil Hits the Water

When oil meets water, the damage compounds by the minute. Here is what is at stake and what a real-time monitoring system delivers.

1 Liter of Oil = 1,000 m² of Surface Contamination

Within minutes, a small leak spreads into an environmental catastrophe — and a regulatory and financial nightmare.

Cleanup Cost Grows Exponentially with Every Hour of Delay

Manual rounds and periodic sampling are too slow. A proactive oil spill detection system is no longer optional — it’s critical infrastructure.

Who's at Risk

Environmental Damage

Irreversible harm to marine ecosystems, fisheries, and coastal habitats

Regulatory Fines

Non-compliance penalties under MARPOL, EPA, and local environmental regulations

Operational Shutdown

Production halts, legal liability, and costly cleanup operations

Reputation Loss

Public and stakeholder trust eroded by preventable incidents

What a Real-Time System Provides

A complete real-time oil spill monitoring solution gives you all of these at once.

01

Early Detection

Detect oil contamination immediately after it appears.

02

Reduced Environmental Impact

Prevent oil from spreading across large water areas.

03

Improved Regulatory Compliance

Support environmental protection requirements and monitoring regulations.

04

Lower Operational Costs

Reduce dependence on manual inspection and laboratory testing.

05

Faster Emergency Response

Allow operators to take corrective actions quickly.

The Solution

Your Complete Oil Spill Detection and Monitoring System — Not Just a Sensor

Most oil spill monitoring solutions stop at the sensor. Ours is a turnkey detection-and-response ecosystem — sensor, controller, alarm, and SCADA integration — engineered to work together from day one.

01

DSOD703 Non-Contact Oil Detection Sensor

UV fluorescence optical sensor detecting oil films as thin as 1 µm from up to 10 meters above the water surface. IP68 stainless steel or titanium alloy housing.

02

Intelligent Controller

Central processing unit with RS485 Modbus communication. Configures alarm thresholds, logs events, and manages multiple sensors on a single controller.

03

Audible & Visual Alarm Station

On-site high-intensity strobe lights and loud sirens trigger instantly when oil exceeds preset thresholds. Optional remote alarm repeaters for large facilities.

04

SCADA & PLC Integration

Seamless Modbus RTU integration into existing SCADA, DCS, and PLC networks. Real-time data, automated valve/pump actuation, and compliance event logging.

Core Technology — DSOD703

DSOD703 — The Heart of the Oil Spill Detection System

Engineered for continuous, non-contact detection of hydrocarbon contamination on water surfaces, in any environment, 24/7.

The Oil Spill Detection and Monitoring System from Desun Uniwill provides an automatic and reliable solution for detecting oil contamination on water surfaces. By integrating the DSOD703 non-contact oil spill detector, an intelligent controller, audible and visual alarm system, and SCADA integration, the system enables 24/7 real-time oil spill monitoring and immediate response.

Designed for critical applications including ports, offshore platforms, oil terminals, wastewater channels, and industrial facilities, this system helps operators detect oil film formation at an early stage and minimize environmental and operational risks.

Technical Specifications

ParameterDSOD703-B (0–2m)DSOD703-A (0–10m)
Detection PrincipleUV Fluorescence (365nm excitation)UV Fluorescence (365nm excitation)
Sensitivity1 µm oil film thickness1 µm oil film thickness
Response Time< 5 seconds< 5 seconds
False Alarm Rate< 1%< 1%
Measurement Distance0–2 m0–10 m
CommunicationRS485 (Modbus RTU)RS485 (Modbus RTU)
Power Supply12V DC / 7W12V DC / 7W
Dimensions (L×D)Φ110mm × 115mmΦ110mm × 406mm
Ingress ProtectionIP68IP68
Operating Temp-20°C ~ 60°C-20°C ~ 60°C
HousingStainless Steel / Titanium AlloyStainless Steel / Titanium Alloy
CertificationsCE, CNEXCE, CNEX
Sunlight ShieldNot requiredIncluded

Detectable Oil Types

Crude OilDieselMarine Bunker FuelLubricating OilHydraulic OilTransformer OilJet FuelHeavy Fuel OilIndustrial OilMotor OilWaste OilPetroleum Products

Designed for petroleum-based hydrocarbons. Not intended for vegetable or synthetic oils.

Key Advantages

Why the DSOD703 Stands Out

A combination of sensitivity, non-contact reliability, and industrial integration that the alternatives simply cannot match.

High Sensitivity for Thin Oil Films

Oil spills often begin as a very thin film before developing into larger contamination events. The DSOD703 can detect oil films down to approximately 1 micron, allowing operators to identify contamination at an early stage.

Early detection helps:
  • ✓Reduce cleanup costs
  • ✓Minimize environmental damage
  • ✓Improve emergency response speed

Non-Contact Measurement

Unlike traditional immersed oil sensors, the DSOD703 does not require direct contact with water.

Benefits include:
  • ✓Less fouling
  • ✓Reduced maintenance
  • ✓Longer service life
  • ✓Suitable for harsh environments
  • ✓Easier installation
Particularly suitable for:
  • ✓Ports
  • ✓Offshore platforms
  • ✓Oil terminals
  • ✓Drainage channels

24/7 Automatic Monitoring

Manual inspection cannot provide continuous protection. A real-time oil spill monitoring system operates continuously and can detect unexpected leakage events at any time.

The system provides:
  • ✓Continuous monitoring
  • ✓Automatic alarm
  • ✓Historical data recording
  • ✓Remote supervision

Long Installation Distance

The DSOD703 can be installed above the water surface. With installation capability of up to approximately 10 meters, it provides flexible deployment options for:

  • ✓Bridges
  • ✓Platforms
  • ✓Drainage channels
  • ✓Storage facilities
  • ✓Marine structures

Easy Industrial Integration

The oil spill monitoring system supports integration with existing automation systems. Communication options include:

  • ✓RS485
  • ✓Modbus RTU
  • ✓Relay output
  • ✓PLC connection
  • ✓SCADA integration

This allows the system to become part of a complete industrial environmental monitoring network.

Detection Process

How the Oil Spill Detection and Monitoring System Works

From optical scan to automated response — a complete detection pipeline that runs continuously, 24 hours a day, 365 days a year.

Step 1 — Continuous UV Scan

365nm beam targets water surface from above

Step 2 — Fluorescence Excitation

Oil molecules emit 400–650nm fluorescence

Step 3 — Signal Processing

Spectral filtering distinguishes oil from debris

Step 4 — Threshold Trigger

User-defined thresholds activate alarm sequence

Step 5 — Multi-Channel Alert

Strobe, siren, SCADA, SMS — all simultaneously

System Design

System Architecture: From Detection to Response

A typical oil spill monitoring system deployment integrates seamlessly across four operational layers.

Field Layer

DSOD703 sensors at monitoring stations: outfalls, intake channels, drainage wells, loading docks

Control Layer

Intelligent controller processes sensor data, manages alarm logic, outputs control signals via RS485 Modbus

Alarm Layer

On-site strobe & siren for immediate local alert

Supervisory Layer

SCADA / DCS integration for centralized remote monitoring

Global Installation Cases

Installed in Various Fields

Desun Uniwill Oil Spill Detection and Monitoring Systems have been deployed in desalination plants, diesel storage facilities, industrial wastewater systems, and coastal oil depots. These real-world installations demonstrate the DSOD703’s ability to provide continuous, non-contact oil spill detection and early warning in demanding industrial and environmental applications.

Worldwide Trust

Trusted Worldwide: Proven Deployments of Our Oil Spill Monitoring System

From Middle Eastern desalination plants to Asian steel mills — the DSOD703 oil detection system is protecting waters across the globe.

LocationFacility TypeApplicationSensors
Abu Dhabi, UAESeawater Desalination PlantIntake channel monitoring — protecting freshwater supply5
Hainan, ChinaCoastal Oil DepotLoading area & drainage monitoring2
RussiaIndustrial Wastewater ChannelContinuous effluent oil monitoring1
Fujian, ChinaRiver Monitoring StationRiver oil spill early warning system2
South KoreaDiesel Storage FacilityUnderground tank leak monitoring9
PolandLake MonitoringEnvironmental lake protection4
TurkeySteel PlantWastewater discharge monitoring2
VietnamIndustrial FactoryWastewater discharge monitoring1
ChileMarine UseMonitor oil spills in real time for maritime operations1

Proven Across Multiple Oil Spill Monitoring Applications

From seawater desalination plants and coastal oil depots to diesel storage facilities and industrial wastewater channels, DSOD703 provides a non-contact approach to real-time oil spill detection.

Its UV fluorescence sensing technology can detect oil films on water surfaces without direct immersion, making it suitable for continuous monitoring in industrial, marine, wastewater, and fuel storage environments.

Key Applications of Oil Spill Detection and Monitoring Systems

Oil spill detection and monitoring systems are widely used in environments where water contamination risks exist. Typical applications include:

ApplicationMonitoring Purpose
PortsDetect ship fuel leakage and harbor pollution
Offshore PlatformsMonitor marine oil contamination
Oil DepotsDetect storage and transfer leakage
Drainage ChannelsPrevent oil discharge into environment
RefineriesMonitor industrial wastewater
Power PlantsDetect oil contamination from equipment
Marine TerminalsProtect coastal water resources

Each application requires reliable, continuous, and automatic oil spill monitoring capability.

Technology Advantage

Why Non-Contact Oil Spill Detection Wins

Submerged sensors face constant biofouling, corrosion, and damage. Our non-contact oil spill monitor eliminates these problems at the root — delivering faster alerts, lower maintenance, and longer service life.

FeatureNon-Contact (DSOD703)Submerged Sensors
BiofoulingNone — sensor never touches waterFrequent — algae, barnacles, debris
MaintenanceMinimal — periodic inspection onlyHigh — regular cleaning & recalibration
Sensor LifespanExtended — no water contactReduced — constant immersion degradation
Detection SpeedInstant — <5 secondsVaries — dependent on flow & condition
False Alarm Rate<1% with spectral filteringHigher — turbidity & debris interference
InstallationSimple — mount above water surfaceComplex — submerged fixture & cable routing
Hazardous AreasSafe — remote from liquidsRisk — direct exposure to hazards
Total Cost of OwnershipLow — less maintenance, longer lifeHigh — frequent service & replacement

Oil Spill Detection Technologies Comparison

Choosing the correct technology depends on the application requirements. The following comparison shows why UV fluorescence is suitable for continuous oil spill monitoring.

Detection TechnologyReal-Time MonitoringThin Oil Film DetectionWorks at NightAutomatic AlarmContinuous Operation
UV Fluorescence Sensor✔✔✔✔✔
Camera Monitoring✔Limited✕Limited✔
Infrared Detection✔Limited✔✔✔
Satellite Monitoring✕LimitedLimited✕✕
Manual Inspection✕Limited✕✕✕
Why Desun Uniwill

Why Choose the DSOD703 Oil Spill Detection and Monitoring System

  • Complete Turnkey System: Sensor, controller, alarm, and SCADA integration — not just a component you build around.
  • Ultra-Fast Response: Sub-5-second detection-to-alert cycle ensures containment begins before the spill spreads.
  • Published Specifications: We openly publish sensitivity, response time, and false alarm rate — because we stand behind our performance.
  • Dual Material Options: Stainless steel for standard applications; titanium alloy for the most corrosive marine environments.
  • Global Track Record: Proven deployments across Asia, Middle East, and Europe — from desalination to offshore platforms.
Common Questions

Frequently Asked Questions About Oil Spill Detection and Monitoring

Everything you need to know before deploying your oil spill detection and monitoring system.

An integrated solution that continuously scans water surfaces for hydrocarbon contamination. It combines optical UV fluorescence sensors, a central controller for signal processing and alarm logic, audible/visual alarms for local alerting, and SCADA/PLC integration for remote monitoring and automated response — providing 24/7 real-time surveillance that enables rapid containment.

The sensor emits a 365nm UV beam from above the water surface. When oil is present, hydrocarbon molecules absorb the UV light and re-emit it as visible fluorescence (400–650nm). The sensor’s optics capture this signature, and advanced algorithms distinguish oil from false triggers like algae, leaves, or plastic. Because the sensor never touches water, it eliminates biofouling and the frequent maintenance required by submerged sensors.

The DSOD703 is calibrated for petroleum-based hydrocarbons: crude oil, diesel, marine bunker fuel, lubricating oil, hydraulic oil, transformer oil, jet fuel, heavy fuel oil, industrial process oil, motor oil, waste oil, and other refined petroleum products. Vegetable oils and synthetic oils are outside the detection scope.

Yes. Natural materials have fundamentally different fluorescence characteristics than petroleum hydrocarbons. The DSOD703’s spectral filtering algorithms analyze the wavelength signature — petroleum products emit within a specific band (400–650nm) that differs from organic matter. Combined with the intelligent controller’s multi-parameter logic, the system achieves a false alarm rate of less than 1%.

Sunlight contains UV components that can cause minor interference. The DSOD703-B (0–2m model) operates effectively without additional shielding in most conditions. The DSOD703-A (0–10m model) includes an integrated sunlight shield for optimal performance at longer ranges. Both models can be installed with optional shading accessories for direct-sunlight environments.

All DSOD703 sensors and the intelligent controller communicate via RS485 Modbus RTU protocol — the industry standard for industrial automation. The system connects directly to existing SCADA, DCS, or PLC networks without proprietary gateways. Data points include real-time oil detection status, sensor health diagnostics, alarm states, and event logs.

The non-contact design dramatically reduces maintenance. Recommended: periodic visual inspection of the sensor lens (frequency depends on environment), annual functional verification testing, and firmware updates when available. No chemical reagents, calibration solutions, or consumable parts are required. Expected sensor lifespan exceeds 5 years under normal operating conditions.

The DSOD703 operates reliably from -20°C to 60°C. The non-contact design means ice formation on the water surface does not affect the sensor — it continues monitoring ice-free areas. The stainless steel and titanium housing options provide excellent corrosion resistance in cold, humid, and salt-spray environments.

Ready to Deploy Your Oil Spill Detection and Monitoring System?

Every facility is unique. Our engineering team will help you design the optimal sensor layout, controller configuration, and SCADA integration for your specific application — whether it’s a busy commercial port, a remote offshore platform, a sprawling tank farm, or a network of drainage wells.

Update cookies preferences